Asphalt Calculator

Enter length, width, compacted depth, density, and waste allowance to estimate cubic yards and tons.

Length (ft)

Width (ft)

Depth (in)

Order allowance (%)

Approx. density (lb/ft³)

—Cubic feet

—Cubic yards

—Cubic meters

—Approx. US tons

—Weight depends on actual material density and moisture/compaction.

Construction field-work cluster

Carry measurement uncertainty into the material decision

Use the exact calculator first, then stress-test realistic field measurement and rounding tolerance before a cut or purchase. Keep structural design, code approval and supplier specifications outside the browser estimate.

Start: Construction Calculator Check Area

All 30 construction tools

RafterSpan, pitch, board length and field tolerance Roof PitchRise/run, angle, factor and measurement sensitivity BrickOpenings, waste, modules and order sensitivity Cubic YardsVolume, waste, delivery and tolerance envelope Feet & InchesTape arithmetic, fraction rounding and tolerance Cut ListCut lengths, kerf, stock and tolerance GravelDepth, density, tonnage and order sensitivity StairsRise/run geometry and field-measurement sensitivity

Compacted lift → tonnage → truck & supplier order

Turn a compacted paving target into a purchase plan. Separate geometric compacted volume from compaction/handling allowance, density-based tonnage, supplier increment rounding and truck payload so the order quantity is not hidden inside one estimate.

Paved area (ft²)Compacted depth (in)Compaction / handling allowance (%)Waste / contingency (%)Mix density (lb/ft³)Supplier ton incrementTruck payload (tons)

—Compacted yd³

—Calculated tons

—Rounded order

—Truck loads

Ready.

Stage	Quantity	Formula / assumption	Decision use

Density, compaction allowance and payload are planning assumptions, not mix-design specifications. Confirm the asphalt mix, compacted lift depth and supplier/truck rules before ordering.

Placed volume → order allowance → supplier increment

The entered depth defines the target geometry. Density and order allowance remain assumptions; supplier rounding is shown as a separate purchase step.

Use the product label as the final purchase input

Coverage, package size, density, pattern repeat and usable yield vary by manufacturer and material. v265 keeps these values editable and shows rounding/overage explicitly instead of presenting a default as a hidden certainty.